Rainbow Slide

Field survey site

Dispatched by the manufacturer, or the investor to measure the slope of the site. In general, the natural slope is more than 15 degrees, the length is more than 25 meters, the specific length can be determined according to the slope. The slide is mainly divided into a single slide and double slide, generally recommended for mixed use. If the site has a slope, then use the natural slope, can be slightly amended; no natural slope, available steel frame, scaffolding to build the slope.

Program design

By the rainbow slide manufacturers design construction program: the site measurement results and customer needs combined, design the relevant plan layout and ramp construction drawings, and consultation with customers.

Buffer zone design

The slide is affected by rain and snow. The buffer design needs to be considered in all weather conditions. It should be safe to slide down and smoothly stop, so the buffer area needs to be designed by the direction of decline in three sections for deceleration, deceleration effect step by step, and increasing friction, so that on sunny days, rain, snow are able to decelerate and stop, without hitting the protection.

Site cleanup

Clear the site debris, and adjust the site ramp and slope, to facilitate the later construction.

Ramp hardening and shaping

In order to ensure the smoothness of the construction ramp surface, the ground needs to be hardened during installation. Some sites do not allow hardening, you can lay wooden boards and other equipment instead of hardening.

Slideway laying

Normal construction, according to the construction drawings for the laying of the slide. After the completion of the paving, but also for its test slide operation, in order to observe whether the visitor sliding range is in the intended range.